Decay heat measurement of fusion related materials in an ITER-like neutron field

Morimoto, Yuichi*; Ochiai, Kentaro; Maekawa, Fujio; Wada, Masayuki*; Nishitani, Takeo; Takeuchi, Hiroshi

Journal of Nuclear Materials, 307-311(Part2), p.1052 - 1056, 2002/12

https://doi.org/10.1016/S0022-3115(02)01296-5

Decay heat is one of the most important factors for the safety aspect of ITER. Especially, prediction of decay heat with uncertainty less than 15% for the three most important materials, i.e., copper, type-316 stainless steel (SS-316) and tungsten, is strongly requested by designers of ITER. To provide experimental decay heat data needed for validation of decay heat calculations for SS316 and copper, an experiment was conducted as the ITER/EDA task T-426. An ITER-like neutron field was constructed, and decay heat source distributions in thick copper and SS316 plates were measured with Whole Energy Absorption Spectrometer. The measured decay heat distributions in the thick sample plates were compared with the predicted values by MCNP calculations. It was found that the use of an effective activation cross section calculated by MCNP was needed to consider the self-shielding effects and, for both cases, MCNP calculations could predict decay heat adequately.